Cologne – The specialty chemicals company LANXESS has developed a new normalization software for analyzing reverse osmosis. PerforMem automatically imports system data from templates in standard process control systems and quickly normalizes even large volumes of data.
 

PerforMem also provides a much more detailed graphical representation of process data and normalized values. Normalized values can then be converted to various formats for further processing or analysis if necessary.

The easier way to localize interference factors

Whenever membrane processes suffer from falling retention or reduced performance, this could be due to changes in the water quality or temperature, or deposits in the reverse osmosis system. To allow interference factors to be localized more easily, plant operators should continuously document a range of basic parameters such as temperature, flow, pressure, yield, and conductivity. It can also be helpful to measure the pressure drop, ideally between the concentrate stages.

This data should be normalized – in other words, set in relation to a standard condition. This allows operators to see whether the impaired performance can be attributed to the reverse osmosis system or altered feed parameters.

Digitalization of plant data is one of the focal points and challenges in today’s water management sector. This involves digitalization of not only large-scale plants, but also medium- and small-scale plants. The collection of plant data in a cloud in combination with remote maintenance makes economic sense no matter what size the plant. The data can be used for process optimization and troubleshooting – provided that it can also be analyzed. “This is frequently a weak point because, in practice – meaning, when the water treatment plant is in operation – huge volumes of data are recorded very quickly, but are rarely subject to any kind of analysis,” says Lipnizki.

Easy analysis of reverse osmosis with new LANXESS software

The new PerforMem software quickly and accurately calculates current plant and laboratory data in relation to a reference point. This makes it easy to establish whether performance is impaired due to changed feed composition or fouling. If fouling, such as salt deposits, is the problem, countermeasures can be quickly implemented so that the plant can continue to run for as long as possible under optimum conditions.

You can find detailed information about LANXESS products and services for the water treatment industry on the website at lpt.lanxess.com.