Masibus VM908 vibration meter is a basic portable vibration measurement product that reads vibration in various modes. It provides essential periodic monitoring of fan, pump, motor and other industrial machines. It measures the vibration to which it is exposed.

Masibus has a proven track record of manufacturing portable instruments and online process monitoring instruments for over 3 decades. Vibration meter makes cost-effective off line vibration monitoring instrument with various important parameter i.e. displacement, velocity, acceleration.

Vibration meter is a strategic tool for predictive maintenance. It measures off line vibration and provides easy evaluation of health of machines. On this basis further analysis can be done using vibration analyzer for diagnosing the machine problem.

Vibration is measured in terms of r.m.s. and peak. When overall vibration is to be measured, r.m.s. and peak measurement technique is considered best for general machine health.

VM908 is very handy easy to use device for any maintenance crew. It gives very easy understanding of equipment health and guides for repairs. It is also good tool to check out if repair has improved health of machine. Maintenance team can be confident about repair work done by ensuring that vibration reading post repair has gone down and machine is healthy.

• Features
• Application

VSW160 Electronic Vibration Switch provides essential protection for critical equipments like fans, pumps, motors, compressors, etc. It measures the vibration with inbuilt ICP accelerometer when Switch is mounted on the machine and generates relay output for Alarm or shutdown when vibration levels exceed the preset threshold value. VSW160 has rugged design suitable for harsh environments and hazardous areas of Zone 1 & 2, Gas Groups: IIA/ IIB & IIC.

160 Electronic Vibration Switch is available in two options 1) with built in piezoelectric ICP 100mV/g Sensor or 2) With Remote piezoelectric ICP 100mV/g Sensor. VSW160 has bright 3½ digit display and touch Sense Keys for Set point display & manual reset. Optional isolated 4-20mA analog output proportional to Acceleration or Velocity range is available to interface with PLC/DCS/RTU for centralized monitoring and protection.

VSW160 has two independent set points adjustable throughout the range by means of internal multi-turn potentiometers, Relay outputs driven by the set point comparators can be used for Alarm and Trip purpose, the relays are DIP switch configurable for normal or Fail safe Logic, the relays are latching type and resettable by the manual reset key on front or by remote contact closure.

VSW160 is a much more accurate and reliable replacement for the Mechanical vibration switches.

• Features
• Application

The VMS4SE is an upgrade of model VMS4S; additional capabilities have been added by way of no of channels, multi-serial ports, Ethernet port, scanning speed and alphanumeric display. VMS4SE accepts input directly from ICP type Accelerometer, processes the signal and gives analog output in the form of standard current or voltage to suit different applications in Power, Cement and Metal industries; Optionally VMS4SE also accepts Universal Analog input to serve various application.

Modular and Expandable

Vibration Transmitter VMS4SE is modular in architecture and Expandable, I/O slots can accommodate a mix of Vibration Input, Analog Input, Open collector output or Relay output. All field inputs are wired by Pre-Fab cables direct into panel terminals.

Configuration

Vibration Transmitter VMS4SE is used for plan wide predictive maintenance. It takes up online vibration and provides data though software. It is configured using the mVSCAN software which is very user friendly; the unit can also be edited by front keyboard and display. The unit has numeric and alpha-numeric displays for value and tag display, Alarm/Trip and control status are displayed by discrete LEDs on front fascia.

Communication

Vibration Transmitter VMS4SE comes with one RS-485 port as a standard, a second RS-485 port & an Ethernet Port are options to enhance the communication capabilities of the unit and for direct interface with PLC, DCS or SCADA

Buffer Output

Vibration Transmitter VMS4SE comes with Field interface board with Buffered output on BNC connector for analysis purpose of raw signal of Vibration input.

Alarm/ Control

8 Relay and 16 OC outputs can be freely mapped as alarm/trip or control set point

Analog Output

An optional isolated 4-20mA analog output proportional to Vibration range is available to interface with PLC/DCS/RTU for centralized monitoring and protection. Max 8 output is possible.

• Features
• Application

VT7S12E is the most advanced & Compact Vibration Transmitter. It accepts input directly from ICP type Accelerometer, processes the signal and gives analog output in the form of standard current or voltage; the vibration measurement range is field configurable for acceleration, velocity or displacement. The output signal is usually interfaced with PLC or DCS for monitoring and protection. VT7S12E Transmitter has two Relay outputs per channel for Alarm, Trip. Also has additional outputs like Buffered output on BNC connector for analysis purpose, and optional RS485 serial port for direct interface with PLC, DCS or SCADA. VT7S12E is aimed for balance of plant equipments like Pumps, Motors, Fans, Blowers, etc to provide monitoring and protection, the unit Employs True-RMS and calculated RMS-Peak measurement techniques, considered best for general machine condition monitoring. The unit can be field configured and operated by means of front keyboard and display, Relay set points and logic can be set for all application types including fail-safe operation, all configured data is stored in a non-volatile memory.

• Features
• Application

Economical velocity version of the loop powered Industrial vibration sensor designed to monitor vibration in harsh industrial environments. Suitable to monitor machines with speed as low as 500 RPM. Moreover, It uses the industry standard 4-20mA loop that interfaces directly with a PLC, DCS and 4-20mA monitor, making it an excellent choice.

VS101 Accelerometer

The hermetic sealed industrial piezoelectric accelerometer model 101 is design to monitor the vibration in harsh industrial environment. It uses the industry standard ©ICP 2-wire voltage transmission technique with a 4 mA standard constant current supply.

VS125 Loop Powered Sensor

Premium General Purpose Industrial Piezoelectric Vibration Sensors with 4-20mA piezoelectric vibration sensors are design to monitor the vibration in harsh industrial environment. It uses the industry standard 4-20mA loop that interfaces directly with PLC, DCS and 4-20mA monitor.

VS111 Velocity Sensor

Piezovelocity Vibration Sensors with Industrial piezo-velocity transducer model 111 monitors the vibration in harsh industrial environment. It uses the industry standard ©ICP 2-wire voltage transmission technique with a 4 mA standard constant current supply.

Masibus Model 5040 / 5040-XP is much more than a controller capable for complex and demanding process control applications. It has accessibility of both hardware and software features in compact size making it a highly configurable product, offering many features found in costly programmable controllers. Model 5040 is available in Panel mount option, whereas 5040-XP is available in Ex-proof, Wall mount Dual Compartment enclosure.5040 / 5040-XP accepts all analog process inputs like Thermocouple, RTD, Current and Voltage as well as 4 digital inputs, remote set point and feedback resistance input. A comprehensive controlling can be implemented using four relays, four digital outputs and two analog output with any of required control algorithm like auto-tune PID, Onoff or Motorized valve control.

5040 / 5040-XP offers field configurable Control outputs comprising of Relay o/p, SSR o/p & Analog o/p. It has total 4 Relay o/p providing a combination of alarm control output based on application requirement.

5040 / 5040-XP offers 4 nos of open collector digital o/p used for various Alarm diagnostic o/p such as PV Input open, RS input open and VPFB Input open.

Using RS485 interface desired parameters configuration and status can be communicated to SCADA/ PLC/ DCS applications. Important process values can be re-transmitted as any standard current or voltage signal.

It has Fail-safe Design protecting the process in case of system malfunctioning

• Features
• Application

Masibus model LC5296-XP-DC FLP Dual channel Indicator cum controller is certified for the use in Zone 1 of Gas group I, IIA & IIB Hazardous areas. LC5296-XP-DC is available in compact enclosure designed with Touch Sensitive Keys to give full programmability and ease of operation. The Unit is wall mounting with up to 5 gland openings for multi-core cable wiring.

LC5296-XP-DC Dual channel Indicator cum controller is designed using proven micro-controller technology, this controller has been validated to perform accurate and reliable performance in harsh field environments for various process and monitoring applications. LC5296-XP-DC is available with easy to read 4 digit, dual 0.56” Red 7 segment LED display for process value., brightness of which is user adjustable.

It accepts RTD/ mA/ Volt input and provides two relay outputs to perform various control and alarm functions. Process value can also be retransmitted to remote devices as standard current/ voltage signals. Data acquisition can be done on SCADA/ PLC applications through RS485 for further process automation.

Model LC5296-XP-DC is designed to accept universal supply of 85- 265V AC, even it is also available for low voltage 18-36V DC operation as an option. A fast sampling 16-bit ADC is used to provide accurate and repeatable performance required for most critical applications

• Features
• Application

Masibus model LC5296-XP-AT FLP Auto-Tune PID controller is certified for use in zone 1 of gas group I, IIA & IIB hazardous areas optionally IIC certified controller also available in single compartment. The controller is designed with touch sensitive keys to give full programmability and ease of operation which you only find in controllers available for safe areas. The unit is compact available in single and dual compartment enclosure option rich in features and comes with add on options to suit any application.

Model LC5296-XP-AT incorporates easy to read 4 digit displays for PV and SV, brightness of which is user adjustable, the unit can be configured for any TC, Pt-100 or Volts and comes with variety of output options for control, alarm and interface. Model LC5296-XP-AT is designed to accept universal supply of 85-265V AC, it also accepts low voltage 18-36V DC operation as an option, a fast sampling 16-bit ADC is used to provide accurate and repeatable performance required for most critical applications.

While a current limited transmitter supply is standard, options of Re-transmission signal and RS485 can be opted for interfacing with other devices and systems like PLC/ SCADA/ recorder etc.

The unit is wall mounting with up to 5 gland openings for multi-core cable wiring.

• Features
• Application

Masibus LPI-1-XP Explosion Proof series Loop powered Indicator is available in two mounting types; Wall mount and 2” Pipe Mount, having LED display. Both models are two-wire loop powered and need no Auxiliary power. The voltage drop across the loop is limited to 5V maximum.

Loop powered Indicator is housed in compact Ex-Proof enclosure suitable for Gas Group IIA/IIB, Zone 1 & 2, the enclosure is also IP-65 certified. Both models deliver an accuracy of 0.1% of FS combined with a low temperature drift.

The indication range can be easily scaled by 3 pushbuttons inside, the scale can be set to any range between -1999 to 9999 for 4-20mA input, and reverse scaling is also possible.

The display is factory oriented for horizontal or vertical mounting but can be also reoriented in the field.

• Features
• Application

Masibus Model TT7S10-D/TT7S10-XP is a 2-Wire Loop Powered & fully programmable Universal Temperature Transmitter with Display, designed for Isolated and accurate temperature measurements and signal conditioning applications.

Model TT7S10-D is Din Rail Mount Transmitter and Model TT7S10-XP is Ex-proof transmitter available in Single or Dual compartment enclosure having Wall or 2″ Pipe mount option.

TT7S10-D/TT7S10-XP is programmable for Thermocouples, Pt-100 RTD, mV and Resistance/Potentiometer. Output signal is standard 4-20mA in 2-wire mode. A built-in 4 digit LED display facilitates the user to monitor process value and helps in instantaneous configuration and calibration. Transmitters have Process Temperature value display setting for °C, °F & K. Programming of the Transmitter is done either by keyboard or user friendly mTRAN windows based configuration software.

TT7S10-D/TT7S10-XP Transmitter is built using the latest technology to deliver high performance in accuracy, resolution, stability and isolation. Transmitter is equipped with Zero/Span adjustments, sensor break detection, Downscale/Upscale output and Reverse Loop Polarity protection.

Software techniques like polynomial linearization and digital filtering gives linearized and stable output in harsh industrial conditions, high level of isolation between input and output prevents ground loop errors and protects costly measurement and control systems under fault conditions.

Configuration access of device is protected by assigning a Password in order to ensure a high degree of protection against unauthorized modification to configuration and calibration.

• Features
• Application

Masibus model 8208-XP Scanner, is the Ex-proof version of model 8208, and is certified for use in Hazardous areas and is available in two types of enclosures.

8208-XP is the most compact multi-point scanner available in the market; designed with the latest Touch Sense Keys to give full programmability and ease of operation.

8208-XP comes in density of 4 or 8 channels; each channel input type is universal and has 4 fully programmable relay output for Alarm/Trip purpose. The unit has separate Numeric displays for Channel, Group and PV. All Configuration and Calibration can be done from front panel keypad The 4 relays can be freely mapped as Alarm, Trip or control set point. User has option to program set-points and logic individually or group wise. Channels can be configured up to 4 groups with one relay per group; 2 groups with 2 relays per group or 1 group with 4 relays per group. Two discrete LEDs are provided per channel and one LED per relay for status indication.

8208-XP has built-in Isolated RS485 serial communication port with Modbus RTU protocol and provides optional analog retransmission output with group Max/ Min to further interface with PLC/DAS/DCS/ SCADA. 8208-XP is available in two options Type-1 and Type-2 Wall Mount Enclosure. 8208-XP Type-1 Enclosure has maximum 8 glands possibility, whereas 8208-XP Type-2 Enclosure has maximum of 12 glands possibility and also has Rotary Switch for on/off.

• Features
• Application