Spin Flash Dryer

Signup to View Contact Details
To prevent spam and unsolicited messages to our customers,
please signup to view the contact details.

Contact the supplier via Chemical Market and we will help you get a potential discount

Description

Spin flash dryer is a easy process for drying Filter Cakes, Pastes and high Viscous liquid. 

Advantages: 

1. Material is directly fed from filter press to dryer.
2. Less drying time hence less labour handling and quick production.
3. Less electricity load
4. Space is 1/3  that of Spray dryer
5. Various product range.
6. Energy consumption saving.
7. Fuel consumption saving.
8. Influence of heat on heat sensitive products is remarkably low even at high temperature.
9. Lump breaker with variable speed feed screw feeder for non clogging of feed.
10. Only two operators are required to operate the plant instead of number of labourers in conventional drying system.
11. The environmental conditions remain clean.

PROCESS:
The product is fed to the feed Agitator which is connected to a variable speed screw conveyor and conveyed to the Spin flash chamber in a rated capacity. The air is heated by passing over indirect fired hot air generator. The material come to the spin flash chamber get disintegrated between the rotating spins and simultaneously dried within the hot air media. Dried product is collected from the bottom of bag filter. A separate control panel mounted with instruments is also provided. The process is displayed by MIMIC diagram on control panel.

The material of construction of equipment depends on the product to be dried. The advantage of the system is that it can be operated at high temperature for non sensitive products.